Pumps and Pump Spares

Hardi 1203

Hardi 1203 Pump Full Assembly:

• Two diaphragm positive displacement pump.

• Base plate incorporated in crankcase.

• Self-priming.

• Can be run dry.

• Can rotate clockwise or anticlockwise.

• Single grease point for lubrication.

• Dry sump to simplify maintenance.

• No special tools needed for maintenance.

• Polyurethane diaphragms and seals.

• Stainless steel diaphragm discs and bolts.

• Cast iron crankcase and covers.

• 11/4" suction port, 1" pressure port.

Go to Spare Parts for This Pump

Hardi 1303

Hardi 1303 Pump Full Assembly:

•Three diaphragm positive displacement pump

• Base plate incorporated in crankcase.

• Self-priming.

• Can be run dry.

• Can rotate clockwise or anticlockwise.

• Three grease points for lubrication.

• Dry sump to simplify maintenance.

• No special tools needed for maintenance.

• Polyurethane diaphragms and seals.

• Stainless steel diaphragm discs and bolts.

• Cast iron crankcase and covers.

• 11/4" suction port, 1" pressure port.

Go to Spare Parts for This Pump

Hardi 363
£

Hardi 363 Pump Full Assembly:

• Six diaphragm positive displacement

radial pump with base plate.

• Self-priming.

• Can be run dry.

• Can rotate clockwise or anticlockwise.

• One grease point for lubrication.

• Dry sump to simplify maintenance.

• No special tools needed for maintenance.

• Polyurethane diaphragms and seals.

• Cast iron crankcase and covers.

• Stainless steel bolts and plates for diaphragms.

• 11/2” suction port, 1” pressure port.

• Hydraulic drive kit available

Go to Spares for This Pump

Hardi 463

Hardi 463 Pump Full Assembly:

• High capacity six diaphragm positive displacement

radial pump with base plate.

• Self-priming.

• Can be run dry.

• Can rotate clockwise or anticlockwise.

• One grease point for lubrication.

• Dry sump to simplify maintenance.

• No special tools needed for maintenance.

• Polyurethane diaphragms and seals.

• Cast iron crankcase and covers.

• Stainless steel bolts and plates for diaphragms.

• 2” suction port, 11/4” pressure port.

• Hydraulic drive kit available.

Go to Spare Parts for This Pump

Hardi Hot Liquid Pump

Hardi Hot Liquid Pump Full Assembly:

• Six diaphragm positive displacement radial pump

• For hot liquids up to 90°C / 194°F.

• Supplied with base plate.

• Self-priming.

• Can be run dry.

• Can rotate clockwise or anticlockwise.

• One grease point for lubrication.

• Dry sump to simplify maintenance.

• No special tools needed for maintenance.

• Nitril diaphragms and seals.

• Stainless steel valves.

• Stainless steel diaphragm discs and bolts.

• Cast iron crankcase and covers.

• Surface coated black.

• Not factory lubricated. Requires suitable grease

Go to Spare Parts for This Pump

Comet BP 60

Comet BP60 Pump Full Assembly:

•N. of diaphragms / pistons:2

•Flow rate:58,0 l/min 15,3 U.S. g.p.m.

•Pressure:20,0 bar 290,0 p.s.i.

•Power:3,3 CV 2,4 KW

•RPM:550

•Weight:9,8 Kg 21,6 lb

Go to Spare Parts for This Pump

Comet BP 105

Comet BP105 Pump Full Assembly:

•N. of diaphragms / pistons:3

•Flow rate:104,0 l/min 27,5 U.S.g.p.m.

•Pressure:20,0 bar 290,0 p.s.i.

•Power:5,5 CV 4,0 KW

•RPM:550

•Weight:12,9 Kg 28,4 lb

Go to Spare Parts for This Pump

Comet BP 151

Comet BP151 Pump Full Assembly:

•N. of diaphragms / pistons:4

•Flow rate:138,0 l/min 36,5 U.S. g.p.m.

•Pressure:20,0 bar 290,0 p.s.i.

•Power:7,8 CV 5,7 KW

•RPM:550

•Weight:24,0 Kg 52,9 lb

Go to Spare Parts for This Pump

Comet BP 205

Comet BP205 Pump Full Assembly:

•N. of diaphragms / pistons:6

•Flow rate:193,0 l/min 51,0 U.S. g.p.m.

•Pressure:20,0 bar 290,0 p.s.i.

•Power:10,2 CV 7,5 KW

•RPM:550

•Weight:32,0 Kg 70,5 lb

Go to Spare Parts for This Pump

Comet BP 281

Comet BP281 Pump Full Assembly:

•N. of diaphragms / pistons 6

•Flow rate 248,0 l/min 66,0 U.S. g.p.m.

•Pressure 20,0 bar 290,0 p.s.i.

•Power 14,1 CV 10,4 KW

•RPM 550

•Weight 38,0 Kg 83,8 lb

Go to Spare Parts for This Pump

AR70

AR70 Pump Full Assembly:

•Number of diaph 2

•Delivery (l/min) 74.1

•Delivery (gpm) 19,6

•Pressure (bar) 20

•Pressure (psi) 290

•Power (hp) 3.4

•RPM 550

•Weight (kg) 11.8

•Dimensions (mm) L 232

•Dimensions (mm) H 335

•Dimensions (mm) W 245

•Suction (mm) ø 30

•Outlet (mm) ø 25

•Temperature Max °C 60

Go to Spare Parts for This Pump

AR115

AR115 Pump Full Assembly:

•Number of diaph 3

•Delivery (l/min) 107.9

•Delivery (gpm) 28,5

•Pressure (bar) 20

•Pressure (psi) 290

•Power (hp) 5.5

•RPM 550

•Weight (kg) 15.5

•Dimensions (mm) L 306

•Dimensions (mm) H 293

•Dimensions (mm) W 340

•Suction (mm) ø 40

•Outlet (mm) ø 25

•Temperature Max °C 60

Go to Spare Parts for This Pump

AR135

AR135 Pump Full Assembly:

•Number of diaph 3

•Delivery (l/min) 128.0

•Delivery (gpm) 33,8

•Pressure (bar) 20

•Pressure (psi) 290

•Power (hp) 6.8

•RPM 550

•Weight (kg) 15.5

•Dimensions (mm) L 306

•Dimensions (mm) H 293

•Dimensions (mm) W 340

•Suction (mm) ø 40

•Outlet (mm) ø 25

•Temperature Max °C 60

Go to Spare Parts for This Pump

AR160

AR160 Pump Full Assembly:

•Number of diaph 4

•Delivery (l/min) 166.2

•Delivery (gpm) 43.9

•Pressure (bar) 20

•Pressure (psi) 290

•Power (hp) 8.4

•RPM 550

•Weight (kg) 27.5

•Dimensions (mm) L 382

•Dimensions (mm) H 422

•Dimensions (mm) W 316

•Suction (mm) ø 40

•Outlet (mm) ø 25

•Temperature Max °C 60

Go to Spare Parts for This Pump

AR250

AR250 Pump Full Assembly:

•Number of diaph 6

•Delivery (l/min) 254.4

•Delivery (gpm) 67.2

•Pressure (bar) 20

•Pressure (psi) 290

•Power (hp) 11.4

•RPM 550

•Weight (kg) 38.5

•Dimensions (mm) L 409

•Dimensions (mm) H 480

•Dimensions (mm) W 316

•Suction (mm) ø 50

•Outlet (mm) ø 35

•Temperature Max °C 60

Go to Spare Parts for This Pump

AR280

AR280 Pump Full Assembly:

•Number of diaph 6

•Delivery (l/min) 277,8

•Delivery (gpm) 73,4

•Pressure (bar) 20

•Pressure (psi) 290

•Power (hp) 12,9

•RPM 550

•Weight (kg) 38,5

•Dimensions (mm) L 409

•Dimensions (mm) H 489

•Dimensions (mm) W 453

•Suction (mm) ø 60

•Outlet (mm) ø 35

•Temperature Max °C

Go to Spare Parts for This Pump

AR370

AR370 Pump Full Assembly:

•Number of diaph 8

•Delivery (l/min) 371,5

•Delivery (gpm) 98,2

•Pressure (bar) 20

•Pressure (psi) 290

•Power (hp) 17,3

•RPM 550

•Weight (kg) 58

•Dimensions (mm) L 460

•Dimensions (mm) H 435

•Dimensions (mm) W 635

•Suction (mm) 2 x ø 50

•Outlet (mm) 2 x ø 35

•Temperature Max °C 60

Go to Parts for This Pump

Bertolini Poly 2073

Bertolini Poly 2073 Pump Full Assembly:

•RPM: 550

•Power(HP): 2.8

•Weight(Kg):

•Intake Ø:1" 3/8

•High Pressure Ø:1"

•Oil Type: SAE30

•Oil Capcity(ltrs):0.7

Go to Parts for This Pump

Bertolini Poly 2180

Bertolini Poly 2180 Pump Full Assembly:

•RPM: 550

•Power(HP): 6.5

•Weight(Kg): 26

•Intake Ø:1"¾

•High Pressure Ø: 1"

•Oil Type: SAE30

•Oil Capcity(Ltrs): 2.1

Go to Parts for This Pump

Bertolini Poly 2210

Bertolini Poly 2210 Pump Full Assembly:

•RPM: 550

•Power(HP): 8

•Weight(Kg): 33

•Intake Ø: 2"

•High Pressure Ø: 1"

•Oil Type: SAE30

•Oil Capcity(Ltrs): 3.25

Go to Parts for This Pump

Bertolini Poly 2260

Bertolini Poly 2260 Pump Full Assembly:

•RPM: 550

•Power(HP): 9.8

•Weight(Kg): 39

•Intake Ø: 2"

•High Pressure Ø: 1" 3/16

•Oil Type: SAE30

•Oil Capcity(Ltrs): 4.36

Go to Parts for This Pump

Bertolini Poly 2300

Bertolini Poly 2300 Pump Full Assembly:

•RPM: 550

•Power(HP): 9.8

•Weight(Kg): 39

•Intake Ø: 2"

•High Pressure Ø: 1" 3/16

•Oil Type: SAE30

•Oil Capcity(Ltrs): 4.36

Go to Parts for This Pump

Bertolini Poly 2400

Bertolini Poly 2400 Pump Full Assembly:

•RPM: 550

•Power(HP): 15.3

•Weight(Kg): 45

•Intake Ø: 2" 3/8

•High Pressure Ø: 1" 9/16

•Oil Type: SAE30

•Oil Capcity(Ltrs): 4.36

Go to Parts for This Pump

Bertolini Flange for Hydraulic Motors and Pumps

Bertolini Pump PTO Guard

Altek P70

Altek P70 Pump Full Assembly:

•Capacity at 5 bar: 70 l/min

•Nominal speed: 540 rpm

•Operating time pressure: max. 15 bar

•Short-term pressure: max. 20 bar

•Speed range: 450-600 rpm

•Spline shaft : DIN 9611 / ISO 500

•Standard working diaphragms: 2 x NBR

•Accumulator diaphragms: 1 x NBR

•Inlet-ø suction side: AS40

•Outlet-ø pressure side: AS30

•Lubrication: Oil bath

•Weight: 8,7 kg

Go to Parts for This Pump

Altek P100

Altek P100 Pump Full Assembly:

•Capacity at 5 bar: 100 litres/min

•Nominal speed: 540 rpm

•Operating time pressure: max. 15 bar

•Short-term pressure: max. 20 bar

•Speed range: 450-600 rpm

•Spline shaft : DIN 9611 / ISO 500

•Standard working diaphragms: 2 x NBR

•Accumulator diaphragms: 1 x NBR

•Inlet-ø suction side: AS40

•Outlet-ø pressure side: AS30

•Lubrication: Oil bath

•Weight: 11,8 kg

Go to Parts for This Pump

Altek P120

Altek P120 Pump Full Assembly:

•Capacity at 5 bar: 120 l/min

•Nominal speed: 540 U/min

•Operating time pressure: max. 15 bar

•Short-term pressure: max. 20 bar

•Speed range: 450-600 U/min

•Spline shaft : DIN 9611/ISO 500

•Standard working diaphragms: 2 x NBR

•Accumulator diaphragms: 2 x NBR

•Inlet-ø suction side: AS50

•Outlet-ø pressure side: AS30

•Lubrication: Oil bath

•Weight: 13,2 kg

Go to Parts for This Pump

Altek P150

Altek P150 Pump Full Assembly:

•Capacity at 5 bar: 150 l/min

•Nominal speed: 540 U/min

•Operating time pressure: max. 15 bar

•Short-term pressure: max. 20 bar

•Speed range: 450-600 U/min

•Spline shaft : DIN 9611/ISO 500

•Standard working diaphragms: 4 x NBR

•Accumulator diaphragms: 1 x NBR

•Inlet-ø suction side: AS50

•Outlet-ø pressure side: AS30

•Lubrication: Oil bath

•Weight: 16,2 kg

Go to Parts for This Pump

Altek P200

Altek P200 Pump Full Assembly:

•Capacity at 5 bar: 200 l/min

•Nominal speed: 540 U/min

•Operating time pressure: max. 15 bar

•Short-term pressure: max. 20 bar

•Speed range: 450-600 U/min

•Spline shaft : DIN 9611/ISO 500

•Standard working diaphragms: 4 x NBR

•Accumulator diaphragms: 1 x NBR

•Inlet-ø suction side: AS50

•Outlet-ø pressure side: AS30

•Lubrication: Oil bath

•Weight: 22 kg/26 kg

Go to Parts for This Pump

Altek P260

Altek P260 Pump Full Assembly:

•Capacity at 5 bar: 260 l/min

•Nominal speed: 540 U/min

•Operating time pressure: max. 15 bar

•Short-term pressure: max. 20 bar

•Speed range: 450-600 U/min

•Spline shaft : DIN 9611/ISO 500

•Standard working diaphragms: 4 x NBR

•Accumulator diaphragms: 1 x NBR

•Inlet-ø suction side: G2 (BSP) male; d=47

•Outlet-ø pressure side: AS30

•Lubrication: Oil bath

•Weight: 30 kg

Go to Parts for This Pump

Flojet Quad 4000

•3.1 Bar switch setting

•14.0 Lpm max flow

•12 Volt DC, 10.0 Amps

•Santoprene diaphragm

•Viton check valve

•1/2" hose barb ports

•Self-priming, up to 2.4m

•54°C max fluid temperature

•Integrated pressure/demand switch

•Fitted with thermal overload

•Polypropylene pump housing

Go to Parts for This Pump

Hypro Roller Vane 4101

27.3 Lpm max flow

10.3 Bar max pressure

2600 Rpm max speed

1.1 Hp max power

Cast Iron body & rotor

Viton Seals

Agritrac's Policy on Roller Vane pumps is to replace the pump if it is damaged or not working correctly as this is the most cost effective route.

Hypro Roller Vane 7560

85 Lpm max flow

20.7 Bar max pressure

1200 Rpm max speed

6.1 Hp max power

Cast Iron body & rotor

Viton Seals

8-roller pump with Super Rollers

15/16" male shaft

3/4" female ports

60°C max fluid temperature

Agritrac's Policy on Roller Vane pumps is to replace the pump if it is damaged or not working correctly as this is the most cost effective route.

Hypro Roller Vane 1700

170 Lpm max flow

13.8 Bar max pressure

1000 Rpm max speed

6.1 Hp max power

Cast Iron body & rotor

Viton Seals

5-roller pump with Super Rollers

15/16" male shaft

1" female ports

60°C max fluid temperature

Agritrac's Policy on Roller Vane pumps is to replace the pump if it is damaged or not working correctly as this is the most cost effective route.

Hypro Roller Vane 1500

235 Lpm max flow

13.8 Bar max pressure

1000 Rpm max speed

7.1 Hp max power

Cast Iron body & rotor

Buna-N Seals

6-roller pump with Super Rollers

15/16" male shaft

1"1/2 female ports

60°C max fluid temperature

Agritrac's Policy on Roller Vane pumps is to replace the pump if it is damaged or not working correctly as this is the most cost effective route.

Hypro 9307 Series

9.3 Bar max pressure

1400 Lpm max flow

Non self-priming

Hydraulic motor driven

Cast iron body, viton seals

200 Bar max oil pressure

76 Lpm max oil flow

3" female pump inlet

2" female pump outlet

7/8"NPTF in, 1"1/16NPTF out motor ports

Silicon carbide mechanical seal

AISI 316 st.steel impeller

Go to Parts for This Pump

Hypro 9300 Series

5.8 Bar max pressure

310 Lpm max flow

Non self-priming

Hydraulic motor driven

Polyproylene body, viton seals

150 Bar max oil pressure

26.5 Lpm max oil flow

1"1/2 female pump inlet

1"1/4 female pump outlet

1/2" & 3/4"NPTF motor ports

Carbon ceramic mechanical seal

Glass filled polypropylene impeller]

Go to Parts for This Pump

Ace FMC 75

•Integral Needle Valve bypasses up to

9 GPM (34 LPM) on Open Center

Systems

•Standard Viton® Carbon/Ceramic or

Optional Severe Duty Silicon Carbide

Mechanical Seal

•Polypropylene Corrosion Resistant

Construction

•Stainless Steel Shaft and Hardware

Go to Parts for This Pump

Ace FMC 150

Suction 1-1/2” Discharge 1-1/4”

• Recommended for use on the following

Hydraulic Systems:

• Pressure Compensating Closed Center

• Load Sensing or Pressure Flow

Compensating Closed Center

• Open Center up to 16 GPM(60 LPM)

• Integral Needle Valve bypasses up

to 9 GPM (34 LPM) on Open Center

Systems

• Standard Viton® Carbon/Ceramic seal

or Optional Severe Duty Silicon Carbide

Mechanical Seal

• Chemical Resistant Valox® or Optional

Cast Iron or Polypropylene Impeller

• Stainless Steel Shaft and Wear Ring

Go to Parts for This Pump

Ace FMC 855F

• Suction and Discharge - 300 Series

Flange for Maximum Flow

• High Performance Pump

• Maximum Flow 325 GPM (1230 LPM)

• Maximum Pressure 150 PSI (10.3 BAR)

• WetSeal Technology

• Prevents Run Dry Failures

• Isolates Seals from Chemicals

and Fertilizers

• Maximum Reliability

• Operates at Lower RPM

• Oversized Bearings

• High Efficiency 4000 PSI (275 BAR)

Pressure Plated Gear Motor

• E-coat Corrosion Protection

Go to Parts for This Pump

Ace FMC 750F

• Suction 300 Series Flange

• Discharge 220 Series Flange

• High Performance Pump

• Maximum Flow 290 GPM (1098 LPM)

• Maximum Pressure 150 PSI (10.3 BAR)

• WetSeal Technology

• Prevents Run Dry Failures

• Isolates Seals from Chemicals

and Fertilizers

• Maximum Reliability

• Operates at Lower RPM

• Oversized Bearings

• E-coat Corrosion Protection

• High Efficiency 4000 PSI (275 BAR)

Pressure Plated Gear Motor

• Optional Case Drain Available

Go to Parts for This Pump

Udor Zeta 120

Udor Zeta 120 Pump Full Assembly:

•Max Flow(l/min): 116

•Max Pressure(Bar): 20

•Max Power(HP): 5.7

•Weight(Kg): 17.5

Go to Parts for This Pump

Udor Zeta 200

Udor Zeta 200 Pump Full Assembly

•Max Flow(l/min): 198

•Max Pressure(Bar): 20

•Max Power(HP): 9.8

•Weight(Kg): 25.6

Go to Parts for This Pump

Udor Zeta 260

Udor Zeta 260 Pump Full Assembly:

•Max Flow(l/min): 256

•Max Pressure(Bar): 20

•Max Power(HP): 12.5

•Weight(Kg): 36.2

Go to Parts for This Pump

Pacer Transfer Filling Pump Electric

Pacer S-Series

•Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases

•They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners

•The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.